FITTING & INSTALLATION

Buy your parts from us and we'll fit them properly at our Penrose workshop. Our installers do this every day, the work is WOF compliant, and the workmanship is covered.

All prices below include GST and are based on a clean, unmodified vehicle. If the vehicle has existing modifications, seized or damaged hardware, or arrives in poor condition, there may be an additional charge — we'll always talk to you before any extra work is done.

Bars & Front End

Job Price fitted
Bullbar — bar only $600
Bullbar — with winch $1,000
Winch fitting (on its own) $300
Brush bar / nudge bar $150
Wheel carrier $600
Rear step $600

Suspension

Every suspension job includes a free wheel alignment.

Job Price fitted
Front springs only (pair) $350
Front springs and shocks (pair) $350
Rear springs (pair) $350
Rear blocks (pair) $200
Leaf springs (pair) $600

Wheels & Tyres

Job Price fitted
Wheels $25 per corner
Tyres $25 per corner
Wheels and tyres bought from us $25 per corner

Tray, Canopy & Lids

Job Price fitted
Trifold lid — hard or soft $75
Roller lid $350
Aluminium full hard lid $600
Canopy $600
Roof platform $600

Protection & Accessories

Job Price fitted
Snorkel — plastic $200
Snorkel — stainless $450
Rock sliders / side steps $100
Driving lights / light bars $200
Awning $300

How It Works

  1. Order your parts online, or ring us and we'll work out what fits your ute.
  2. Add fitting to your order at checkout — the install price is shown on the product page.
  3. We'll call you to book a time at our Penrose workshop once your parts land.
  4. Drop the vehicle in, we fit it, you drive away sorted.

Not sure what your ute needs, or want something that isn't on this list? Get in touch and we'll quote it.


Services are covered by the Consumer Guarantees Act

Fitting work we carry out must be done with reasonable care and skill, and be fit for purpose. Those are your rights under the Consumer Guarantees Act 1993 and nothing here limits them.

Vehicle certification

Some modifications require Low Volume Vehicle (LVV) certification before the vehicle can legally be used on the road. This commonly applies to changes in ride height or suspension geometry, and to wheel spacers and adapters.

Where a product you are buying is likely to require certification, we will tell you before you order. Arranging certification is the customer's responsibility. We can arrange it on request, but we do not do so by default. Certification cost is not included in our fitting price.

Warrant of Fitness

A modification that is not certified where certification is required will fail a WOF. Some accessories can also affect a WOF in their own right if incorrectly fitted or if they obstruct lights, plates or vision. Fitting carried out by us is done to be WOF compliant at the time of fitting.

Your vehicle's manufacturer warranty

Fitting aftermarket accessories may affect your vehicle manufacturer's warranty, particularly for suspension, electrical and driveline components. This is between you and your vehicle manufacturer or dealer. We recommend checking with them before ordering if your vehicle is still under new vehicle warranty.

Booking and vehicle condition

Fitting is by appointment. Please arrive with the vehicle clean enough for us to work on and with any roof or tray load removed. We will note any existing damage before work starts.

Fitting times are estimates. Where we find rust, prior damage or a non-standard previous modification, we will stop and call you before continuing.

Parts you supply yourself

We will fit parts you supply on a case-by-case basis. We do not fit anything and everything, and we may decline a part we consider unsafe or unsuitable. Where we do fit a part you supplied, our workmanship is covered but the part itself is not.

If you are not happy with fitting work

Contact us at sales@nucleusimports.com within 7 days. Bring the vehicle back to 30 O'Rorke Road, Penrose, Auckland 1061 and we will inspect it. Where the work was not done correctly we will put it right at no charge.