COLOR CODED SMOOTH FLARES - RANGER PX3
Nucleus Imports NZ · Fender Flares

Colour Coded Smooth Flares - Ranger PX3

Check your model and year before ordering — send us your rego and we will confirm it
$900.00incl. GST
Finance available at checkout
CALL ABOUT THIS PART
Fitting available
At our Penrose workshop
Covered by the CGA
Your statutory rights apply
Nationwide freight
Rural delivery available
Returns accepted
Unfitted, in original packaging, 14 days

In-stock items dispatch within 3 working days. Auckland 2 working days, North Island urban 3, South Island urban 4, rural add 3.

About this part

High Quality ABS UV treated plastic

Compatible for 2019 - 2020 PX3 models. Includes pre-molded holes for sensors

Installed using double sided adhesive tape and screws (all included)

Flares are color coded on order. Flares will be shipped approx 5 business days after purchase.

We will require:

- The color name

- The color code

We recommend getting this from your local dealer as they are no longer provided on the door jam.

Pictures are of actual product

Approx 155 mm tall, and approximately 45 mm wide

For example, a heat gun is recommended and careful use is required for a snug finish and for proper adhesion.

IMPORTANT: We color match exactly to the code provided. From past experience, not all colors provided are correct. This is either due to wear and tear, incorrect code, incorrect paint applied to vehicle or a combination. We are not liable for any mismatch of color shading. We recommend sending us your fuel cap cover to color match with, which guarantees an exact match.

Installation & Fitment
Professional installation is highly recommended. Although these flares can be installed without professional assistance, installation can be tricky and time-consuming without previous experience, and the finish may not be as clean and tidy.

A suitable silicone adhesive or equivalent must be used when installing the flares. The tape acts as a temporary brace, holding the flares in position while the adhesive cures. Tape alone is not sufficient for permanent installation. Follow the adhesive manufacturer's instructions for preparation, application and curing time.

A heat gun is also recommended and must be used carefully to achieve a snug fit and proper adhesion.

We do not offer refunds or exchanges for damage or poor fitment caused by incorrect installation. This does not affect your rights under the Consumer Guarantees Act.
Specifications
BrandNucleus Imports NZ
TypeFender Flares
SKUPX3SFCC
Weight5.0 kg